Stack Silencers, Industrial Silencers, Sound Absorbing - Silentec
Over 30 years experience in noise, gas flow and blast door solutions
Silentec – design, manufacturing and consultation in noise reduction, gas flow and blast proof doors, specializing in acoustics, vibration abatement and building acoustics. Products include steel stacks, cold stacks, boiler stack, industrial stack, stack silencers, industrial silencers, exhaust silencer, vent silencers, steam silencers, reactive silencers, exhaust muffler, membrane silencer, no-clogging silencer, cartridge silencer, ventilation silencer, acoustic louvers, intake silencer, hybrid silencer, noise barriers, acoustic barriers, acoustic wall, noise screen, infrasound control, Helmholtz resonator, soundproofed cabins, soundproofed personnel cabins, acoustic enclosures, soundproofed building, HRSG thermo-acoustic casing, HRSG acoustic shroud, HRSG silencer, gas turbine exhaust system, generator exhaust system, generator muffler, generator silencing, blow-off silencer, water tower noise abatement, sound absorbing panels, expansion joint, visco-elastic dampers, vibration isolators, turning vanes, blast doors, acoustic hangar doors, test cell doors, door bottom drop seal, acoustic seal, automatic door drop seal, acoustic door pneumatic seal, and soundproofed windows. Consulting and installation services. Noise surveys, noise diagnostic testing, noise simulation, noise map, flow simulation, CFD analysis, stack plume simulation, stack emission dispersion simulation, environmental noise assessment, noise control. Noise performance guarantee. Industries served include power generation plants, aircraft engine testing facilities, jet engine test cell, mines, quarries, cement, metals, petrochemical, food, beverages, pharmaceutical and manufacturing plants, HVAC contractors, municipalities and residential clients.

Acoustic Louvers - Technical Specifications

Silentec Model PA

Silentec acoustic louvers, model PA, allows for air flow while reducing noise. It can be installed in modules, adjacent or superposed, inside a frame fixed in a building wall or as an external barrier-wall.

Notes:
(1) Standard models in galvanized steel, 24" wide x 48" height
(2) Available optionally:
      a. Protection grid, 1/2" x 1/2" galvanized wire, installed at inlet or outlet
      b. Protection of acoustic media by fiberglass cloth with or without plastic cover
      c. Stainless instead of galvanized steel
      d. Finishing paint
(3) The Dynamic Insertion Loss (DIL) and the pressure loss in the table assume a velocity of 250 feet       per minute between louvers, at a 70 degree F temperature